FPGA Module ZU19EG

profpga_fm-zus__500x500_400x400.png

Technical Highlights

  • Xilinx Zynq™ UltraScale+™ ZU17EG FPGA
  • Embedded Quad-core ARM® Cortex™-A53
  • Embedded Dual-core ARM® Cortex™-R5
  • USB 3.0, Gigabit Ethernet, DDR4 & SPI Flash memory
  • 531 standard I/Os and 16 high speed serial transceivers

Further Information

 

Product Summary

zynq_us_19_architecture__400x400_360x360.png

The proFPGA product family is a complete, scalable, and modular multi FPGA solution, which fulfills highest needs in the area of FPGA based HPC. Part of this modular and flexible system concept is the proFPGA Zynq™ UltraScale+™ ZU17EG FPGA module, which can be easily mounted on the proFPGA uno, duo or quad motherboard and mixed together with various other proFPGA FPGA modules. The ZU17EG FPGA module addresses customers who require a complete and powerful embedded processing platform for High Performance Computing, high performance SoC Prototyping, IP verification and early software development.

Equipped with a Xilinx Zynq™ UltraScale+™ ZU17EG FPGA which combines a uand on board interfaces like USB UART and SDIO, the board offers a complete embedded processing platform. Further interfaces like USB 3.0, Gigabit Ethernet, Display Port, SATA or CAN can be easily added via the Zynq UltraScale+ Interface Board. In addition the board offers already DDR4 memory via SODIMM slot and single QSPI flash memory.

The FPGA module offers a total of 4 extension sites on the top and bottom side with a total of 531 free standard I/Os and 16 high speed serial transceivers for extending the board with standard proFPGA or user specific extension boards or to easily interconnect it to further proFPGA FPGA modules to extend the capacity.

proFPGA Zynq™ UltraScale+™ ZU19EG FPGA Module Specification
FPGA TypeZynq™ UltraScale+™ ZU19EG (speedgrade 1,2 )
Capacity6.2 M ASIC gates
Embedded Processor CoreQuad-core ARM® Cortex™-A53 and Dual-core ARM® Cortex™-R5
Interfaces Processor System
  • On-Board
    • USB UART interface for debugging
    • SDIO
  • External Extension Boards (e.g. via Zynq UltraScale+ Interface Board)
    • USB 3.0
    • Gigabit Ethernet
    • CAN
    • Display Port
    • GPIO
    • I2C
    • SATA
    • PMU access
Memories Processor System
  • DDR4 memory via SO DIMM module
  • Single Quad SPI Flash Memory
Signaling rateUp to 1.2 Gbps (standard I/O)/ up to 16 Gbps (MGT) depending on FPGA speedgrade
Extension sitesUp to 5 extension sites with high performance connectors
I/O resources
  • 531 per FPGA module
    • 3 x 153 I/Os (High Denistity Bank) to 2 x top/1 x bottom extension sites
    • 1 x 72 I/Os (High Performance Bank) to top extension site
      Single-ended or differential
  • 52 x dedicated I/Os to Processor System
High Speed I/O transceivers
  • High Speed I/O transceivers16 per FPGA module
    • 1 x 8 MGTs (up to 16 Gb/s depending of FPGA speedgrade) to top extension site A2
    • 1 x 8 MGTs (up to 16 Gb/s depending of FPGA speedgrade) to top extension site B2
  • 4 dedicated MGTs to Processor System
Available interface boardsPCIe Gen1/Gen2/Gen3, MIPI, DVI, DDR3/DDR4/Flash/LP DDR4 memory, etc.
Voltage regions
  • 4 individually adjustable voltage regions per FPGA Module
  • Stepless from 1.2V up 3.3V for HD IOs and 1.0. to 1.8 for HP IOs
Clocking over proFPGA duo/quad Motherboard
  • 8 global clock and sync signal inputs per motherboard
  • X fully synchronous derived clocks with sync signals
System RequirementsWorks only with proFPGA uno, duo or quad motherboard
ConfigurationVia Ethernet and USB or PCIe with proFPGA Builder Software
PowerExternal (optional) ATX Power Supply (12 V, 24 - 35 A output)
Dimensions
  • 5.91" x 0.95" x 5.91" / 150 mm x 24 mm x 150 mm (width x height x depth)
  • 0.25 kg weight
Product article numberPROF119 FM-XCZU19EG-R1
Order codePROF-FM-XCZU19EG-1/PROF-FM-XCZU19EG-2 (speedgrade 1/2)

HPC Products Overview